Tapflo

Pompe cu rotor flexibil

RU pic hyg

Industrial flexible impeller pumps for standard and hygienic applications.FIP series.

PREZENTARE GENERALA
PERFORMANTA

PREZENTARE GENERALA

Pompe cu rotor flexibil

The new FIP series flexible impeller pumps can be used for handling a wide range of liquids. Main features: increasedoperating pressure, upgraded pump housing and the shaft seal, new impeller materials.

RU pic hyg

Stainless steel pumps for hygienic applications

During the processing of food and dairy, hygiene is the most important factor in the process. FIPpolished stainlesssteel impellerpumpseries are especiallydesignedfor the transfer ofmilkand other food productsandmeetseventhe most stringenthygiene standards.

FIP-pump creates a negative pressure, and does not require priming or filling if there is gas or air inside the liquid or system. The unique design reduces maintenance and cleaning time to a minimum. The pump cover is easily removed, providing full access to the impeller. Down-time is further reduced with no need to disconect the pump from piping system. Impellers are available along with FDA approved food grade.

UA pic FIP4

Stainless steel pumps for industrial applications

Available in either close coupled flange or conventional padestal mount. 316 stainless steel pumps with BSP or NPT threads suitable for non hygienic applications: pet food slurry, brine injection, flocculants, detergents, sampling, sludge with air, water based glues/paints, glycols, glycerine, dyes.

RU pic FIP bronz

Bronze pumps for pumping corrosive liquids

Bronze pump with BSP threads for liquids such as: saltwater, mineral oils, sluries, additives or abrasive products.

PERFORMANTA

Pompe cu rotor flexibil

Operating principle

Download Media File

Due to the eccentric interior cross-section of the pump body, a partial vacuum is created as the volume increases between the flexible impeller wings at the inlet port. The resulting suction draws the liquid into the pump.
The rotating impeller carries the liquid from the inlet towards the outlet port. During this part of the cycle, the volume between the wings remains virtually constant. The distance between the wings allows non-abrasive solids to pass through the pump without damaging the particles or pump
The liquid is discharged from the pump in a continuous, uniform flow when the wings bend, thus decreasing the volume between them, as they come into contact with the flattened part of the eccentric interior walls of the body

Technical data

Pump body:	Stainless steel, Bronze
Impeller:	FDA-approved EPDM, Neoprene, Nitrile
Max capacity:	30 m3/h
Max pressure:	4 bar
Max temperature:	55 оС
Self-priming up to:	5 m

Capacity data based on water at 20 C - 1400 RPM

Performance-FIP